TF100 6-pin electric LCD display

TF100 6-pin electric LCD display

TF-100 trigger with accelerator, compatible with 24V, 36V, 48V, 52V and 60V batteries and controllers.

Please note, the accelerator harness is not included with the screen and the controller must be compatible with the screen.

E01: Motor error. Check the motor wiring or a possible failure of the Hall effect sensors.
E02: Accelerator failure. Possible fault: screen sensor or stuck accelerator lever.
E03: Controller error. General controller failure.
E04: Brake lever error. Faulty brake lever sensor or brake lever activated at ignition time.
E05: Low battery voltage.
E06: A communication error is displayed. The screen cannot receive data from the controller; the Rx cable is cut or incorrectly connected.
E07: Controller communication error. The controller cannot receive data from the screen; the Tx cable is cut or incorrectly connected.

Compatible with the following models: compatible generic part